RUBBER ACCELERATOR TMTM(TS)
Chemical Name:Tetramethyl thiuram monosulfide
Molecular Formula:C6H12N2S3
CAS NO:97-74-5
Specification:
Item
Powder
Oiled powder
Granule
Appearance (visual inspection)
Yellow powder(granule)
Initial M.P. oC≥
104.0
104.0
104.0
heating loss %≤
0.40
0.40
0.40
Ash%≤
0.30
0.30
0.30
Residues on sieve(150μm), % ≤
0.10
0.10
Residues on sieve(63μm), % ≤
0.50
0.50
Oil content, %
1.0-2.0
Granule diameter, mm
2.0
Properties:The yellow powder (granule). The density is 1.37-1.40. No osmyl and no taste. Soluble in benzene, acetone, CH2CI2, CS2, toluene, party soluble in alcohol and diethyl ether, insoluble in gasoline and water Stabilization for storage
Application:Generally used as a secondary accelerator or as a booster for sulphenamides to achieve faster cure rate Distinguished by very good processing safety in comparison with other thiurams, high curing activity and no discoloration. No cure activity in the absence of added elemental sulphur. An excellent accelerator for polychloroprene in association with DPG and sulphur.
Packing:25kg plastic woven bag, paper with plastic film bag, kraft paper bag
Storage:The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The product with pallet should not be stacked. Stacking of palletized material or temperature of above 35℃ can cause unusual compacted product. The validity is 2 years. |
免责声明： 以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，企业录对此不承担任何责任。如有侵犯您的权益，请来信通知删除。